DRAUGHT PROOFING DOORS
Authentic beechwood door bottom seal to keep out draught. The profile has a velvet brush (soft PP).
This door seal is suitable for interior doors and floors with uneven surfaces, but can also be used for sliding doors.
Is beech not quite your colour? The wood can easily be painted over.
Description
- Beechwood
- Black velvet brush (soft PP)
- Draught proofing
- Paintable
- Application: interior doors and sliding doors
- Mounting screws included
- Can be cut to the right length
Technical details
- Max gap: 17 mm
- Width x height: 12,5 mm x 33 mm
- Standard length: 100 cm
Specifications
All standard lengths can be cut to length.
| LENGTH | ART.NR | COLOUR | EAN (PC.) | UNIT |
| 100 cm | 090200050 | Beech | 8711286860807 | 6 pc. |
Note: It is possible to purchase the product individually at your local hardware store or home improvement center.
Installation advice
Draft under the door can easily be stopped by correctly installing the door bottom seal. Read the supplied installation instructions, watch the installation instruction video and follow the step-by-step plan.
Prepare the necessary materials in advance:
- Tape measure or folding rule
- Pencil
- Wood saw and file
- Drill with Phillips bit
Step-by-step guide: installing door bottom seal HDS B Authentic Wood
- Measure the width of the door to determine the length of the door bottom seal
- Mark the correct length on the door bottom seal, note: average the hole pattern for optimal attachment
- Cut the profile to size
- File off any splinters that may have formed from the wood
- Place the profile on the bottom of the door, with the brush covering any gaps with the floor surface when the door is closed
- Screw the door bottom seal in place with the supplied screws
- NOTE: for painting the HDS B
First remove the brush from the wooden holder profile and do not put it back until the paint has dried
Related products
