DRAFT-PROOFING DOOR
Wear strip ANB 6 ZK is a self-adhesive aluminum wear strip with a TPE seal. The wear strip protects the threshold (sill) from wear and helps block drafts.
The self-adhesive wear strip is suitable for back doors, patio doors, and balcony doors with a clearance of 6 mm. It can be mounted on natural stone sills.
Description
- Self-adhesive wear strip
- Aluminum profile with seal
- Plastic (TPE) seal
- Protects the entire threshold
- Anti-slip and draft-proof
- Clearance: 6 mm
Application:
- For back doors, patio doors, and balcony doors
- Suitable for installation on natural stone sills
Features:
- Can be cut to the correct size
Technical details
- Maximum gap: 6 mm
- Wear strip width: 33 mm
- Height: 3,5 mm
- Self-adhesive
Specifications
All standard lengths can be trimmed to size.
| LENGTH | ART. NO. | COLOUR | EAN (PC.) | UNIT |
| 300 cm | 330502230 | Alu. | 8711286291663 | 15 pc. |
Note: It is possible to purchase the wear strip individually at your local hardware store or home improvement center.
Performance
Classification according to NEN EN 12365: W43133.
Installation advice
To ensure the wear strip functions properly, it's important to install it correctly. Please read the included mounting instructions and follow the step-by-step guide.
Prepare the necessary tools beforehand:
- Tape measure or folding rule
- Pencil
- Hacksaw and file
Step-by-step guide: Installing wear strip ANB 6 ZK
- Measure the length of the threshold to determine the correct length for the wear strip.
- Mark the correct length on the wear strip.
- Saw the wear strip to size.
- File off any burrs that may have formed on the aluminum.
- Remove the protective backing from the adhesive strip and place the wear strip on the threshold, with the plastic seal positioned against the door.
Related products
