DRAUGHT PROOFING DOORS & WINDOWS
This self-adhesive weatherstrip is suitable for closing medium/medium-sized gaps (3 - 5 mm) around wooden windows and doors.
In addition, you can also use the weatherstrip on steel interior door frames thanks to the self-adhesive tape.
This product is made of high qualilty foamed plastic (P-profile), provides a very good seal and keeps draughts and cold outside the door or window.
Available in white, black and brown.
Description
- Weatherstrip for medium gaps
- Self-adhesive
- Foamed plastic (EPDM)
- For doors and windows
- Also suitable for steel constructions
- Available in white, black and brown
- Note: there are 2 strands of weatherstripr attached to each other, you need to pull them apart before installing them
Technical details
- Gap coverage 3 - 5 mm
Specifications
The weatherstrip is easy to trim or cut to size.
| LENGTH | ART.NR | COLOUR | EAN (PC.) | UNIT |
| 7,5 m | 600301050 | White | 8711286853304 | 8 pc. |
| 7,5 m | 600304050 | Black | 8711286851607 | 8 pc. |
|
7,5 m |
600302050 | Brown | 8711286851409 | 8 pc. |
|
2 x 50 m |
600301515.1 | White | 8711286352258 | 1 roll |
|
2 x 50 m |
600304515.1 | Black | 8711286354016 | 1 roll |
|
2 x 50 m |
600302515.1 | Brown | 8711286353248 | 1 roll |
Note: It is possible to purchase the product individually at your local hardware store or home improvement center.
Installation advice
Attach the self-adhesive weatherstrip correctly and keep the draught out. Read the supplied assembly instructions, watch the assembly instruction video and follow the step-by-step plan.
Prepare the necessary materials in advance:
- Cloth and degreaser
- Tape measure
- Pencil
- Scissors and/or Stanley knife
Step-by-step guide: installing self-adhesive weatherstrip Medium gap
- Measure the frame to determine the length of the weatherstrip
- Mark the correct length on the weatherstrip
- Cut to size
- Clean and degrease the frame thoroughly
- Remove the beginning of the protective layer of the self-adhesive tape
- Attach the weatherstrip to the frame from top to bottom and press firmly
Note: On the hinge side of the frame, do not attach the draught excluder to the rebate, but to the wide part of the frame!
Related products
