DRAUGHT PROOFING DOORS & WINDOWS

Self-adhesive weatherstrip - Large gap

Self-adhesive weatherstrip - Large gap

Tje self-adhesive weatherstrip is suitable for sealing large gaps (4 - 6 mm) around windows and doors.

It can also be used on steel interior door frames.

The high-quality product made of foamed plastic (D-model), provides a very good seal and keeps draughts and cold outside.

Available in white, black and brown.

Description

  • Weatherstrip for large gaps
  • Self-adhesive
  • Foamed plastic (EPDM)
  • For doors and windows

  • Also suitable for steel constructions
  • Available in white, black and brown

  • Note: there are 2 strands of weatherstripr attached to each other, you need to pull them apart before installing them

Technical details

  • Gap coverage 4 - 6 mm

Ellenflex tochtband grote kier toepassing

Specifications

The weatherstrip is easy to trim or cut to size.

LENGTH ART.NR COLOUR EAN (ST.) UNIT
7,5 m 600501050 White 8711286852000 8 pc.
7,5 m 600504050 Black 8711286852505 8 pc.

7,5 m

600502050 Brown 8711286852307 8 pc.

2 x 50 m

600501515.1 White 8711286354412 1 roll

2 x 50 m

600504515.1 Black 8711286355464 1 roll

2 x 50 m

600502515.1 Brown 8711286354412 1 roll

Note: It is possible to purchase the product individually at your local hardware store or home improvement center.

Installation advice

Attach the self-adhesive weatherstrip correctly and keep the draught out. Read the supplied assembly instructions, watch the assembly instruction video and follow the step-by-step plan.

Prepare the necessary materials in advance:

  • Cloth and degreaser
  • Tape measure
  • Pencil
  • Scissors and/or Stanley knife

 

Step-by-step guide: installing self-adhesive weatherstrip Large gap

  1. Measure the frame to determine the length of the weatherstrip
  2. Mark the correct length on the weatherstrip
  3. Cut to size
  4. Clean and degrease the frame thoroughly
  5. Remove the beginning of the protective layer of the self-adhesive tape
  6. Attach the weatherstrip to the frame from top to bottom and press firmly

Note: On the hinge side of the frame, do not attach the draught excluder to the rebate, but to the wide part of the frame!

Question? We are happy to help you with the solution

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.