Product Passport: Self-Adhesive Draft Stopper
In this product passport, you’ll find more information about our self-adhesive weatherstripping, including installation instructions, specifications, and how to recycle it.
Installation Guidelines
Apply the self-adhesive draft stopper correctly to keep drafts out of the door.
Gather the necessary materials in advance:
- A cloth and degreaser
- Tape measure
- Pencil
- Scissors
- Utility knife
Step-by-Step Guide to Installing Self-Adhesive Draft Stopper Tape
- Measure the window frame to determine the length of the draft stopper
- Mark the correct length on the weatherstripping
- Cut the draft stopper to size
- Thoroughly clean and degrease the window frame with the cloth and degreaser
- Peel off the protective liner from the self-adhesive tape
- Attach the weatherstripping to the window frame from top to bottom and press firmly
Note: On the hinge side of the window frame, do not attach the weatherstripping to the rebate, but to the wider part of the frame!
Material Specifications
| PRODUCT | MATERIAL | RECYCLABILITY |
| Small gap | Foamed plastic (EPDM) | Good, via general waste |
| Medium gap | Foamed plastic (EPDM) | Good, dispose of with general waste |
|
Large gap |
Foamed plastic (EPDM) | Good, dispose of as general waste |
|
Silicone weatherstripping |
Silicone | Fine, dispose of with general waste |
Packaging
- Material: recycled cardboard
- Natural inks and varnish
- Recyclable: yes
- Disposal: waste paper