Product passport: Self-adhesive weatherstrip

In this product passport, you’ll find more information about our self-adhesive weatherstrip, including installation instructions, specifications, and how to recycle it.

Installation guidelines

Attach the self-adhesive weatherstrip correctly and keep the draught out. Read the supplied assembly instructions, watch the assembly instruction video and follow the step-by-step plan.

Prepare the necessary materials in advance:

  • Cloth and degreaser
  • Tape measure
  • Pencil
  • Scissors and/or Stanley knife

 

 

Step-by-step guide: installing self-adhesive weatherstrip - Small gap

  1. Measure the frame to determine the length of the weatherstrip
  2. Mark the correct length on the weatherstrip
  3. Cut to size
  4. Clean and degrease the frame thoroughly
  5. Remove the beginning of the protective layer of the self-adhesive tape
  6. Attach the weatherstrip to the frame from top to bottom and press firmly

Note: On the hinge side of the frame, do not attach the draught excluder to the rebate, but to the wide part of the frame!

Material Specifications

PRODUCT MATERIAL RECYCLABILITY
Small gap Foamed plastic (EPDM) Good, dispose of with general waste
Medium gap Foamed plastic (EPDM) Good, dispose of with general waste

Large gap

Foamed plastic (EPDM) Good, dispose of with general waste

Silicone weatherstrip

Silicone Fine, dispose of with general waste

 

Packaging

  • Material: recycled cardboard
  • Natural inks and varnish
  • Recyclable: yes
  • Disposal: waste paper