Product passport: Letterbox seal

In this product passport, you’ll find more information about our letterbox seals, including installation instructions, specifications, and how to recycle it.

Installation guidelines

Keep out draughts and cold air by correctly installing the letterbox draught excluder on the inside of your (front) door.

Before you begin, make sure you have the following tools ready:

  1. Tape measure or folding ruler
  2. Pen
  3. Drill with a Phillips screwdriver bit

Then follow the step-by-step instructions.

Step-by-step guide: installing letterbox seals

  1. Also read the installation instructions provided.
  2. Position the letterbox seal centrally over the letterbox opening.
  3. Make sure it is straight and mark the screw holes.
  4. Pre-drill the screw holes.
  5. Secure the letterbox seal using the screws provided.

Material specifications

PRODUCT MATERIAL RECYCLABILITY
Basic plastic Hard plastic, velvet brush, galvanized screws Moderate, via residual waste
Plastic Hard plastic, velvet brush, galvanized screws Moderate, via residual waste

Aluminium

Hard plastic, mounting plate, velvet brush, aluminium flap, galvanized screws Flap good, via scrap metal. The rest moderate, via residual waste

Inox (Stainless steel)

Hard plastic, mounting plate, velvet brush, stainless steel flap, galvanized screws Flap good, via scrap metal. The rest moderate, via residual waste

 

Packaging

  • Material: recycled cardboard
  • Natural inks and varnishes
  • Recyclable
  • Disposal: paper waste

 

  • Screw bage: sugarcane-based material
  • Recyclable
  • Disposal: Organic waste / compostable