Product passport: Frame seal

In this product passport, you’ll find more information about our frame seals, including installation instructions, specifications, and how to recycle it.

Installation guidelines

Draft through gaps around an interior door can easily be stopped by correctly installing the peripheral frame seal. Read the supplied installation instructions, watch the installation instruction video and follow the step-by-step plan.

Prepare the necessary materials in advance:

  • Tape measure
  • Pen
  • Frame cutting pliers or scissors
  • Chissel

Step-by-step guide: installing frame seals

  1. Remove the old frame seal from the frame
  2. Check whether the 'head' height of the old frame seal is the same as the new frame seal
  3. Measure the length of the old frame seal and cut the new frame seal slightly longer
  4. Place the new frame seal in the frame. Start at the top of the frame in the middle
    Work clockwise.
  5. Mark a line in the top right corner of the frame seal
  6. Cut the frame seal at the location of the line, use frame cutting pliers or a frame cutting aid for this
    Note: the frame profile must not be cut completely!
    > frame cutting aid: place the frame with the line in the middle and cut out the corner with a chisel
    > frame cutting pliers: place the frame with the line in the middle and cut out the corner

Materiaalspecificaties

PRODUCT MATERIAL RECYCLABILITY
1201 SCF Silicone Poor, via residual waste.
1501 SCF Silicone Poor, via residual waste.

 

Packaging

  • Material: recycled cardboard
  • Natural inks and varnish
  • Recyclable
  • Disposal: waste paper

 

  • Spool: hard plastic
  • Poorly recyclable
  • Disposal: residual waste