Product passport: Ellen basic

In this product passport, you’ll find more information about our Ellen basics, including installation instructions, specifications, and how to recycle it.

Installation guidelines

Apply the self-adhesive foam correctly to keep draught out. Watch the installation instruction video and follow the step-by-step guide.

Before you begin, make sure you have the following materials ready:

  • Cloth and degreaser
  • Tape measure
  • Pencil
  • Scissors
  • Utility knife

Step-by-step guide: installing Ellen basics

  1. Meausure the door frame to determine the required length of the draught excluder
  2. Mark the correct length on the draught excluder
  3. Cut the draught excluder to size
  4. Thoroughly clean and degrease the door frame using the cloth and the degreaser
  5. Peel back the beginning of the protective backing from the draught excluder
  6. Apply the draught excluder to the door frame, working from top to bottom, and press firmly into place

Please note: on the hinge side of the door frame, do not apply the draught excluder in the rebate. Instead, attach it to the wider, flat section of the frame.

Material specifications

PRODUCT MATERIAL RECYCLABILITY
Foam 9x6mm PU-foam Good, via residual waste
Foam 12x6mm PU-foam Good, via residual waste

Foam 19x6mm

PU-foam Good, via residual waste

 

Packaging

  • Material: plastic
  • Natural inks and varnishes
  • Recyclable
  • Disposal: plastic