Product passport: Drop seals

In this product passport, you’ll find more information about our drop seals, including installation instructions, specifications, and how to recycle it.

Installation guidelines

 

Draught, noise, smoke and fire can easily be stopped by correctly installing the drop seal. Read the supplied installation instructions, watch the video and follow the step-by-step plan.

Prepare the necessary materials in advance:

  • Tape measure or folding rule
  • Pencil
  • Hacksaw
  • File
  • Drill with Philips bit

Step-by-step guide: installing a drop seal

  1. Measure the groove dimensions in the door to ensure that the drop seal fits in the groove
  2. Then measure the width of the door to determine the length of the drop seal
  3. Remove the mounting plates and activator button
  4. Pull the seal back towards the activator button side
  5. Mark the correct length on the drop seal
    Note: shorten on the non-activator button side!
  6. Cut the drop seal to size
  7. File off any burrs that may have formed on the aluminium
  8. Slide the seal back. Ensure that there is enough seal protruding edge on each side for optimum sealing of the corners
  9. Cut off the excess seal
  10. Slide the drop seal into the groove and secure with the mounting plates
  11. Slide the activator button into the opening until it clicks into place
  12. Adjust the drop seal until the desired sealing is achieved
  13. Test the sealing using a piece of paper > the paper must be secure, but must not tear

Material specifications

PRODUCT MATERIAL RECYCLABILITY 
EllenMatic Soundproof Aluminium
Hard plastic
Silicone seal
Galvanized screws
Aluminum and screws good, via scrap metal. Silicone and hard plastic moderate, via residual waste.
EllenMatic Uni-Proof Aluminium
Hard plastic
TPE seal
Galvanized screws
Aluminum and screws good, via scrap metal. TPE and hard plastic moderate, via residual waste.

EllenMatic Brush

Aluminium
Hard plastic
Velvet brush
Galvanized screws

Aluminum and screws good, via scrap metal. Hard plastic moderate, brush poor, via residual waste.

EllenMatic Extra

Aluminium
Hard plastic 
Silicone seal
Galvanized screws
Aluminum and screws good, via scrap metal. Caps and seal moderate, via residual waste. 

POM

Aluminium
TPE seal
Hard plastic
Galvanized screws
Aluminum and screws good, via scrap metal. Hard plastic and TPE seal moderate, via residual waste

 

 

Packaging

  • Material: recyclable corrugated cardboard
  • Natural inks and varnish
  • Recyclable
  • Disposal: waste paper

 

  • Screw bag: 80% recycled plastic
  • Recyclable
  • Disposal: plastic

 

  • Accessory box (POM and EM Extra): cardboard
  • Recyclable
  • Disposal: waste paper